[ Brief Introduction of Production Line ]
Sinoder Indutech Machinery will not only engineer the rotary drum dryer for the specific application, but can also design, fabricate, and supply all of the component parts of the dehydration system including the burner, furnace, cyclone, fan, ductwork, conveyors, truck dump stations, feed hoppers, and airlocks.
Sinoder Indutech Machinery and its partners has made many successful indutrial drying project and solutions.
For example, the follows are industrial drying projects for coal, coal slime high humidity materials.
The Plant locates in Datong, Shanxi province, it is designed and offered by Sinoder Company in year 2011. The The heating resource is coal, Sinoder produces and outsource the complete drying device for the Datang group. The customer wanted to minumize the moisture from 30% to 10-12%. Required capacity is 150 tons per day. Sinoder engineer designned the complete complete drying solution. After the negotiation and study, finally customer agreed to φ1.6m×16m,with processing capacity of Coal slime of 6-7T/h. Sinoder’s technician come to site for guiding the installation, commissioning, trial run and train about two month. The coal dring plant run successfully. The drying project includes coal fuel hot air furnace, rotary drum dryer, cyclone catcher and induced fan, conveyors. Now it is under normal operation. The customer is very satisfied with the operation.
[ Site Image Display ]
Please provide the following information for a preliminary coal drying system design and quotation
1. What is the particle size distribution of the raw coal? Please note that the coal fed into our drying system should be less than 50mm.
2. What are the requirements of drying capacity per hour and per annual? What is the local work system about working hours per shift and per day? How many days they work per annual?
3. What is the moisture content of the raw coal as received basis? What is the moisture content on air dried basis?
4. What is the lower heating value of the raw coal?
5. What is the requirement of the moisture content of the dried coal?
6. What is the local climate condition?
7. What's the coal type?
http://www.sinoder.com/uploadfile/2014/0620/20140620064636639.pdf