Mesh Conveyor Belt Dryer Parameters:
|
Specification
|
DW-1.2-8 |
DW-1.2-10 |
DW-1.6- 8 |
DW-1.6-10 |
DW-2.0-8 |
DW-2.0-10 |
|
Unit
|
4 |
5 |
4 |
5 |
4 |
5 |
|
Drying length(m)
|
8 |
10 |
8 |
10 |
8 |
10 |
|
Thickness of raw material(mm)
|
≤60 |
|
Working temperature
|
50~140 |
|
Steam pressure(MPa)
|
0.2~0.8 |
|
Consumption of steam(kg/h)
|
120-300 |
150-375 |
150-375 |
170-470 |
180-500 |
225-600 |
|
Drying time(h)
|
0.2-1.2 |
0.25-1.5 |
0.2-1.2 |
0.25-1.5 |
0.2-1.2 |
0.25-1.5 |
|
Drying capacity(kg/h)
|
60-160 |
80-220 |
75-220 |
95-250 |
100-260 |
120-300 |
|
Power(kw)
|
11.4 |
13.6 |
11.4 |
13.6 |
14.7 |
15.8 |
| Dimention |
L(m)
|
9.56 |
11.56 |
9.56 |
11.56 |
9.56 |
11.56 |
|
W(m)
|
1.49 |
1.49 |
1.9 |
1.9 |
2.32 |
2.32 |
|
H(m)
|
2.3 |
2.3 |
2.4 |
2.4 |
2.5 |
2.5 |
|
Weight(kg)
|
4500 |
5600 |
5300 |
6400 |
6200 |
7500 |
Note: Any Change of technical data shall not be advised additionally.
If you want to know more information about the Mesh Conveyor Belt Dryer and other drying machinery, pls do not hesitate to contact us by E-mail: sinoder@outlook.com or Phone 0086-18037503060.
Working Principle of belt dryer:
The materials are uniformly distributed on the mesh-belt by the material feeder. The mesh-belt generally adopts 12-60 mesh stainless steel mesh and it is drawn by a transmission device and move inside the dryer . The dryer is composed of several sections. For each section, the hot air is circulated separately. Part of exhausted gas is exhausted by a special moisture exhaust blower. The waste gas is controlled by an adjustment valve. The hot air passes through the mesh-belt covered with bring water material away. The mesh-belt moves slowly, running speed can be freely adjusted according to the material property. The final products after the drying process will fall into the material collector continuously. The top and low circulation units can be freely equipped according to the user's requirements. The number of section might be selected according to the production demands.
